Posted on — Leave a comment

GROWING GARDEN

Hello and welcome. Thank you for popping by to check out today’s project.

Today I’m sharing my project for this week’s Global Design Project theme challenge – #GDP295.

For this project I decided to use the new Batik Boutique Bundle.

BATIK BOUTIQUE BUNDLE

I love these stylised flowers and leaves. They are going to loads of fun to create with.

After choosing the stamp set and dies, I chose colours to coordinate with the Holiday Rhinestone Basic Jewels. I wanted to make a split front card and have the flowers growing up through the opening.

In keeping with the theme – flowers need water to grow, so I used the Water Painters to help these flowers ‘grow’. I stamped the flowers onto Shimmery White cardstock, using Jet Black StazOn.

After the flowers were dry, I cut them using the coordinating Batik Dies and then added some Clear Wink of Stella. For the split front layer, I cut a piece of Night of Navy cardstock measuring 5-3/4″x 4-1/4″. Then I stamped two images from the Batik Boutique Stamp Set onto that piece of cardstock using the same colour ink. Then I placed a tick mark 1″ in from the top left corner along the top and down the left side. I used these marks and the bottom right hand corner to line up along the paper trimmer.

The next step was to position the flowers evenly along each side and secure them in place. The two triangular pieces were then glued into place and the floweres interwined. After gently shaping the flowers and leaves, each flower had a Stampin’ Dimensional placed behind it so that it would stay lifted. I stamped the same floral image inside the card and onto the envelope.

The sentiment comes from the Dragonfly Garden Stamp Set and this layer was cut using one of the Tasteful Label Dies. The finishing touch was to add the Holiday Rhinestone Basic Jewels.

So, what do you think of my growing garden? I’m not sure if I would have thought of this card design if it wasn’t for the GDP challenge. I am enjoying being part of a couple of blog hops and challenges each week.

Happy stamping.

If you live in Australia, you can order any of the products I used to make this card by going to my online store. Just click on any of the images below.

Product List
Batik Dies
[155962]
$50.00
Paper Snips
[103579]
$17.00
Posted on — Leave a comment

HATS OFF TO A GREAT GUY!

Hello and welcome! If this is the first time you have popped by my site, thank you and I hope that you like what you see. If you are a return visitor, I am delighted that you have taken the time to return.

For today’s project I wanted to use the new Hats Off Bundle from the Stampin’ Up!© 2021-2022 Annual Catalogue.

My initial inspiration for using this bundle was from a family holiday experience back in 2017. Rob and I travelled with our daughters, Ashleigh and Kate, to the US for four weeks. During our stay in San Fransisco we hired bicycles, from ‘Burning Saddles’ and rode these bikes from Fishermans’ Wharf to Sausalito. At one of our stops Rob left his Tasmanian Cradle Mountain cap on the picnic table. He had trekked the Cradle Mountain walk with his friend, and our best man, Ed Manley.

To begin with, I knew that I wanted to create three different caps for the project. I also knew that I wanted the brims of each cap to be of different colours.

I also used several cardstock, Classic Stampin’ Pads and Baker’s Twine Essentials Pack colours – Basic Black, Basic White, Cinnamon Cider, Misty Moonlight, Old Olive and Poppy Parade.

I created three different caps and needed to make a slimline card to accommodate them. Each cap was created using a different combination of colours and features. The card at the bottom of the card was actually insired by a cap worn by a man I saw ordering a coffee at my local cafe this morning.

The cardbase front measures 8-1/2″x 4″. I cut a piece of In Good Taste Designer Series Paper to use as a later on the card front – 8-1/4″x 3-3/4″. Using three of the Baker’s Twine Essentials Pack twines, I double wrapped the twine before tying it off in a simple knot. Then I adhered one of the caps under the twine using Stampin’ Dimensionals. The other two caps were then adhered, also using Dimensionals. The sentiments were stamped and cut using one of Stitched Rectangle Dies.

The front of the envelope has three smaller die cut caps overlayed

For the card insert I cut the mini baseball cap in each of the five different colours used for the card front. Then I stacked them on top of each other to create this awesome cap stack. Does this look like a cap stack that someone you know has? Who would you send this card to?

Happy CAP stamping.

If you live in Australia, you can order any of the products I used to make this card by going to my online store. Just click on any of the images below.

Product List
Paper Snips
[103579]
$17.00
Posted on — Leave a comment

A DAY LATE

Hello to each of you who have popped by today to see what I have been ‘up to’. Thank you for your interest – it is very much appreciated.

Today’s project is actually a day late. This was meant to be my project for this week’s Freshly Brewed Project blog hop, yesterday. Unfortunately, I wasn’t able to print the photo I needed in time. My new Canon Selphy printer arrived Tuesday and it took me until Wednesday to get it connected and working.

May be an image of coffee cup and text that says 'Freshly Brewed PROJEGTS'

This week’s theme was Creating with Kits. I had chosen the ‘For the Guys’ Card Kit for this blog challenge.

FOR THE GUYS CARD KIT (ENGLISH)

I started by making the cards using the two layouts.

The really great thing about this kit is the variety of greetings you can use for these cards.

After I made the cards and I needed to think about how to use this kit differently, I immediately thought of a holiday Rob and I enjoyed several years ago. After an amazing Alaskan cruise, we returned to Vancouver and drove to Kamloops and across into the Rockies before heading down to Calgary (before flying into Salt Lake City).

The mountains and lake card reminded me of the lakes we visited in the Rockies. So my alternative use for this part of the kit was to create a memory keeping page.

I have kept the layout very true to the original card and simply cut it down to fit into one of the 6″x 8″ pockets for the coordinating album. Then I used the same colours to create my journalling insert. The Playful Alphabet Dies were perfect to cut the title for this page. I used Adhesive Sheets to easily attach the letters to the cardstock.

After printing this photo, of Rob and I, it was adhered to a base layer of coordinating cardstock so that I could journal the date these photos were taken.

These are the stamps that are included in the kit. If you like the idea of creating cards for the men in your, make sure you contact me to find out how to order it (if you live in Australia, of course). This is really a truly versatile kit to make cards for ‘For the Guys’.

How many men are in your life that you could make different cards for?

Make sure you see what my lovely Freshly Brewed friends have been creating:

Happy stamping – using kits!

If you live in Australia, you can order any of the products I used to make this card by going to my online store. Just click on any of the images below.

Product List
Paper Snips
[103579]
$17.00